logo

Ekobord Fibre Cement Wall Systems

Ekobord Fibre Cement Wall Systems

Ekobord produces aesthetic fibrecement new generation boards of different varieties, which has high resistance, easy to install, human and nature friendly.

Sand, cement, cellulose and catalyst are used in the manufacture of Ekobord fibercement board.

Fibrecement boards are manufactured as flat and various patterned boards resistant to a variety of conditions. All products can also be offered as painted when desired. Moreover, they can also be manufactured with special sizes as well as standard sizes along with the cutting line integrated on the manufacture line.

These new generation boards, with a wide usage area from exterior facades to interior spaces, are manufactured in compliance with all kinds of climatic conditions. They easily accompany every design with their different colors and textures.

Fibre Cement Wall Advantages

  • Pressing operation
    Pressing is done with a capacity of 7000 tons in the manufacture of Ekobord fibercement board. 12 mm is manufactured prior to the pressing in order to manufacture 10 mm board and after pressing process it is reduced to 10 mm thickness.
  • Strength in A, C and D categories
    Ekobord is the only fibercement board having 3 class strength unlike the existing fibercement boards which have 1 or 2 class strength.
  • Usability as rigid bottom layer with D category
    The only fibercement board, which has been deemed compatible for being used also on grounds pursuant to TSE 12467, is Ekobord.
  • Water absorption rate less than 25%
    Water absorption rate of Ekobord fibercement boards is 25% at maximum unlike the existing fibercement boards with about 30% water absorption rate.
  • No cracks
    No material unsuitable to the nature of the board is used in the manufacture of Ekobord fibercement board and cracking possibility is eliminated by applying a pressing process.
  • Non-decomposing and invisible layers
    The board layers tend to adhere to each other 3 times more than other fibercement boards thanks to the pressing process applied and thus the layers of Ekobord fibercement board is not seen and don’t decompose from each other.
  • High sound and heat insulation
    Ekobord fibercement boards alone provide 28 Db sound insulation and have ideal heat insulation because of being manufactured suitably for all kinds of climatic conditions.
  • The only mold-repellent fibercement board
    Ekobord is the only fibercement board which has been proved not allowing mold formation through the tests conducted by international laboratories.
  • Breathing boards
    The fibercement board, which breathes at the highest amount with a water vapor resistance of 250 µ, is Ekobord.
  • The only mold-repellent fibercement board
    Ekobord is the only fibercement board which has been proved not allowing mold formation through the tests conducted by international laboratories.
  • Breathing boards
    The fibercement board, which breathes at the highest amount with a water vapor resistance of 250 µ, is Ekobord.
  • Nature and human friendly
    Human and environmentally friendly, natural and odorless raw materials are used in the manufacture of Ekobord fibercement boards. Ekobord boards don’t emit harmful gases into the environment during any fire.
  • Long-lasting
    Ekobord fibercement boards that are not affected by water and insects do not decay, do not necessitate special care and last many years.
  • High fire resistance
    Ekobord fibercement boards are A1 class incombustible construction material according to EN-13501-1, and help the fire to be put out. They are resistant to cold, chemical substances, atmospheric conditions, ultraviolet rays and animal wastes.
  • Easy to install and use
    Ekobord fibercement boards are lightweight, easily sized, save time with the prime-painted products, easy to transport.
  • Economic
    Ekobord fibercement boards provide saving in time and labor because of no necessity of fine plaster work.
  • Aesthetic appearance
    Patterned Ekobord fibercement boards bring a warm and aesthetic appearance to the buildings.

Usage Areas

Siding
Exteriors
Interior Decorative Plating
Column Facing
Elevator Shaft

Wall Applications
Wall Panels
Shaft Walls
Partition Walls
Prefabricated Building Walls

Surface Applications
Container Surface
False Floor
Surface Panels

False Floor Applications
Prefabricated and Steel Structure Mezzazine Floor Covering

Applications Below The Ceiling and Roof Coatings
Suspended Ceiling
Tile Sheathing

Application

Ekobord has developed 4 different mounting systems for fast and practical applications. It uses products and systems which have either been produced by Ekobord or been produced specially to Ekobord, in the mounting systems developed by Ekobord. Thus, it offers all products and services with the quality of Ekobord.